Flap valve type R-L RLK dynasty 600-1500

Flap valve type RLK R-L 600-1500

Flap valves RLK dynasty R-L 600-1500 has many different sizes, large diameter in the range 600-1500, was distributing application of water resources in the water supply system, water management.

operation

Flap valves RLK dynasty R-L 600-1500 is made from HDPE raw material leak resistant, chemical resistant and oxidation. Light weight should be convenient for the transportation, construction and maintenance. Because is made from HDPE High level so it is not likely to be corroded, rusted metal, capable of working in many countries environmental chemicals. Help improve the lifespan for your works, the product is gradually replacing the metal valve in the water supply and drainage works.

Flap valves RLK dynasty R-L has many different thướt meet the requirements used in actual construction conditions such as water supply, pumping wells, pumping or flowing.

All the products are calculated based on actual requirements, the valve size and pressure resistance are to help the product gained the confidence of the contractor.

Flap valves RLK dynasty R-L design primarily made up of HPDE shield associated with frames based on the axis of the hinge allows freedom of collapsible panels, flexible … made into a door water Coordinator. Dynamic structure allows the water from the inside of the tube exit flow out easily, Coordinator of the water pressure escape. When the water level rises or have the impact from the external pressure valve cap will close from that prevent water intrusion in contrast to inside ducts.

Because is made from HDPE plastic should be very light products, capable of floating on the water so when construction is often associated with the portal or the concrete frame, have a high weight to fixed output into the pipe.

Lid van mounted heavy objects at one end, work to create traction for náp always in the closed state when there is no water pressure from the inside. Therefore, when installing the valve cover on the concrete frame, we should create a valve cover for 15 º from which helps cover van always sealed to avoid insects, small creatures crawl into the tube when not active.

Stop valves door Court overturn RLK R-L produced many sizes, different from the diameter Φ600-Φ1500 match required in your work. Please leave your information and contact our sales department, we will offer you the best solution for your work

specifications

Size: Ø 600 mm t/m Ø 1500 mm

Working pressure: up to 5 mwk

Cover valve angle: 15°, standard fixed Assembly on flat walls

Applied materials

Valve cap: HDPE

The valve frame: HDPE

Handles close the valves: EPDM rubber